PMT-330 | Portable Moisture Tester

Hand Held Moisture Sensor
SYSTEM SPECIFICATIONS
  • ±1.0% Full Scale Accuracy
    Subject to Application
  • Up to 10 Calibrations
  • 0 - 999 Display RAnge
  • 16-Bit RISC Architecture
  • 32 - 120°F (0 - 50°C)
  • 10 Hour Operating Time
    Full Charge


Moisture Sensor From Array

Portable moisture testers satisfy a variety of needs across the spectrum of manufacturing industries. For more than 30 years Sensortech has been the standard of excellence in RF moisture testing and the latest version of the PMT-330 continues that tradition. It is very likely that you know someone who uses the PMT-330 on a daily basis.

The design of the PMT-330 is based on the technology used in Sensortech’s IMPS-4400 Moisture Profiling System and is similar to having a portable version of its advanced technology. Using a Radio Frequency Dielectric Measurement allows the PMT-330 to penetrate the surface of the intended target and receive an accurate measurement of its moisture composition. This is a powerful capability packed into a hand-held device and why it has been the standard of portable moisture testing for so long.

Features

  • Accurate
  • Lightweight
  • Simple Operation
  • Multiple Calibrations
  • 16-Bit Microprocessor
  • Ni-MH Rechargeable Battery

PMT-330G

With an effective penetration depth of approximately 1/4 inch (20mm) the PMT-330G is designed for gypsum and other board applications.

PMT-330V

With an effective penetration depth of approximately 1/8 (3mm) the PMT-330V is designed for veneer and thin sheet applications.